Tag Archives: Thermal

Mechanical Engineer – Oil & Gas Pipelines

MSME. Performs subsea and onshore pipeline and related equipment design, metals fabrication, and various mechanically engineered solutions. Includes pressure vessels, heat exchangers, mixers, tanks, compressors, FEED and rotating machinery. Skilled at various analysis: Stress, vibration, structural. Generates specs/technical docs and flow diagrams, selects/evaluates supplier materials, performs simulation. HazMat Expertise. Uses Pro-E Wildfire, SolidWorks, CAESAR, PV Elite, Algor FEA, PIPESIM, Ansys, Auto/MathCAD. Many Addit’l certs. Contract or Direct. 10 Years. 70K. 06162016.01

Global Technical Sales Engineer – Motors / Marine

A project-oriented sales/marketing professional involving rotating machinery, motors, generators, steam turbines, boilers, waste mgmt equipment, and power electronics for marine, heat recovery, renewables/green energy, industrial, commercial end users. Conventional and magnetic bearings experience. Extensive domestic/international customer interface and system troubleshooting. Delivers consultative presentations to new customers. MS/BS degrees with marine engineering. Uses LadderLogic, LabView, SolidWorks, VersaPro. <10 Years. 90K. 06112015.2

Mechanical Design Engineer – Permanent Magnet Motors

BSME. Mechanical design engineer working with permanent magnet motors, rotor dynamics/rotating hub assemblies, variable frequency drives, electromagnetics/bearings, finned housings, marine turbo chargers and electric generators. Manages full BOMs for motor design concepts. Strong experience with avionics mechanisms (bulkheads, latches). Performs expert GD&T, parametric thermal modeling, and joint analysis. Designs to manufacturability. ASME, Solidworks, COSMOS, AutoCAD, MathCAD. 5 Years. 75K. 06042015.9

Product Development Engineer – Motion Controls

Ph.D-ME, MSEE (Honors). An excellent product developer for automotive, electric vehicle, optical, and robotics applications. Highly skilled in motion controls, software embedded controls, battery management, thermal dynamics, fuel cell controls, sensors and laser systems. Performs simulation, modeling, validation, and strong lead for test setup and development, including robotics. Uses ANSI C, Visual Basic, MATLAB, Simulink, ANSY, LabView, ASCET. Patents and Pubs. 130K. 05292015.5

Mechanical Systems Engineer – Spacecraft/Space Station

MS-Aero. An aerospace systems and programs engineering professional working with spacecraft, Space Station and planetary unmanned vehicles. Mass properties specialist and performs various space mission elemental analysis and design development, such as space debris solutions, re-entry breakup, propulsion/vibration/thermal concerns, cargo modules, inflatable and other shielding, berthing, pneumatic & environmental control systems, air packs. Strong customer design review participant and go-to. Manages mission budgets, performs critical materials sourcing. Uses MPD, BUMPER, Cradle, CORE, MATLAB, STK, PTC Creo, PRO/E, ANSYS, RedTop. Awards & publications. 10 Years. 100K. 05292015.2

Mechanical Engineering Manager – Aerospace/Military

BSME. Mechanical engineering professional, leading multi-disciplinary engineering groups for design and systems integration, aircraft automated systems, cargo mechanisms, regulators, actuators, DC/DC power conversion, enclosures, RF/satellite devices, filters, amplifiers, robotics, controls and various tooling. Performs 3D modeling, ASME GD&T, test, troubleshooting, training, FEA and structural, vibration and thermal analysis, ensuring compliance to customer requirements. Often project lead with customer interaction. Uses Pro/E Wildfire and Mechanica, AutoCAD. 120K. 05202015.3

Manager, Satellite & RF/Microwave Electro-Mechanics

MSEE. Leads design and mechanical engineering team on multiple satellite projects involving mechanical structural and active/passive electronic assemblies, enclosures, amplifiers. Designs thermal interface controls, heat sinks, etc. Performs form factor improvements, fab/assembly validation, component quality assurance, structural, thermal, stress and fatigue analysis and calculations, and root cause. Uses Pro-E/Mechanica, Thermal Desktop, MATLAB, SolidWorks, AutoCAD. 10 Years. 125K. 05192015.4

Chief Engineer – Power Electronics & Systems

Ph.D/MS-EE. Hands-on & “Go-To” Electromechanical power systems design scientist: Motion control/robotics, Space Station power generation systems, thermal sciences, AC/DC conversion, avionics such as actuation, electric vehicle systems/drives.

  • Mentorship/training, has authored design manuals, process improvements, simulation and design tool development, and components/system feasibility
  • Expertise defining customer requirements, bid process risk avoidance, multi-site/international design review with high level client relationship development
  • Review/approval stop-gap. Drives product development/Intellectual Property

Patents, pubs, awards. Call us for more details! 05192015.01

Sr Mechanical Engineer – Contract or Direct

MSME. Has designed and re-designed a variety of products for medical/imaging, industrial and commercial, to include: Machinery, electro-mechanical equipment, fiber optics, scanners, test fixtures, control cabinets, ion beam systems components, tooling, and cryogenics. Performs GD&T, extensive thermal, structural, and gas flow analysis. Interacts with all levels of technical engineering and clients. Uses SolidWorks, MiniTab, Pro/Engineer Wildfire, Cosmos, AutoCAD, MicroStation. Lean, Six Sigma. 15 Years. 100K. 05152015.3

Project Manager – Oil & Gas/Refineries/Power Distribution

MS-Safety, BSEE. Specializes in concept-to-closure project execution involving field oil & gas drilling construction, chemical processing plants and down/upstream refineries.

  • Ensures timely deliverables, manages contractors, handles scope changes, sourcing/procurement with cost reduction improvements and budgeting.
  • Sample projects involve heat exchangers and boiler replacements or repairs, tank containment and new installations.

Safety and OSHA expertise. Background in substation/power distribution construction projects such as expansions, switchgear upgrades, P&C. 10 Years. 110K. 05142015.4

Technology Engineering Manager/CTO – Fiber Optic Sensing

MSEE/PMP. Specializes in R&D fiber optic sensing engineering and product line management for subsea oil & gas temperature  and other monitoring and telemetry applications. Provides various executive management such as re-design, project management, product roadmaps / certifications / marketing, business development, project leadership, direct customer support, and budget development. Numerous publications and patents. 190K. 05112015.2

Electro/Opto-Mechanical Engineer – Contract

BSME. Performs precision design of electro-mechanical / opto-mechanical devices, visual systems, instruments and electronic systems for military, avionics, medical, automation, and commercial industries. Performs packaging and component/system level analysis: Thermal, static/dynamic, computational fluid flow, vibration, shock isolation. Generates production & fabrication drawings; concept/detail, 3D and finite element models; develops supply chain; and designs with EMI/RFI shielding. Pro/Engineer, SolidWorks, Inventor, FloWorks. Contract/Direct. 120K. 04152015.01

Mechanical Engineering Manager – Military / Defense

Multi-Degreed. A process improvement expert value-added to electro/opto-mechanical engineering management skillset, designing military cryptographic and ruggedized enclosures for military transportation such as submarines, tactical training systems, and information systems. Performs and trains thermal / heat transfer, shock, vibration, weight, structural, and tolerance stack-up analysis.  Experience with sustainability, NRE development/costing. Background in military integration/production facility management and operations. Countless design & analysis tools including fluent ICEPACK, DOORS, MATLAB, SolidWorks, Pro-Mechanica. Active Secret clearance. 130K. 04092015.4

Sr Thermo-Mechanical Design and Test Engineer

Ph.D-ME. A scientific leader for design, verification, validation, simulation, 3D modeling, complex test and analysis for microelectronics.

  • High level expertise in computational fluid dynamics, cooling and especially  thermal, vibration, stress, shock, airflow, acoustic and drop testing and analysis, including wind tunnel and benchmark. Generates test procedures.
  • Products: AC/DC chargers, IT (servers, power supplies, enclosures, racks), MEMS, optical/LED and infrared cameras. Applies to IT, wireless, electric vehicles and SmartHome energy.
  • Evaluates materials/components for reliability concerns, develops design algorithms, explores new technology (i.e., fan-less convection cooling).

Uses MATLAB, Ice-Pack/Flotherm, Creo, Algor, AutoDesk. Multilingual, publications. 10 Years. 100K. 04082015.01

 

Sr Electro-Mechanical Project Engineer / Aircraft, DoD

MSEE/BSME. An electro-mechanical engineering design leader for Military/DoD and space/aerospace for motors, actuators, solenoids and high pressure valves applying mostly to aircraft and gunnery vehicles. Technical aspects include pneumatics, coolant control, thermal dynamics, and electro-magnetics. Consistently improves yield, reduces costs, and drives quick prototype turnaround. Experienced with technical proposals, regulatory compliance and has FAA Repair Station background. Skillsets: CNC, Mastercam, MathCAD, Ansoft, Cosmos. Fluent German. 115K. 04072015.3

Sr Mechanical and Thermal Packaging Engineer – Power Supplies

BSME. Specializes in packaging systems and innovative concepts for hi-rel and commercial power supplies (plate-mounted, ferrite core), DC/DC power modules, converters, and power components. Specializes in power supply thermal solutions and cooling systems design. Implements next-generation materials to assembly processes with cost reduction results. Provides customer interaction and presentations. Works product lifecycle from concept to high volume production. Regulatory and military standards. SolidWorks, Pro/E Series, Auto/MathCAD, Flotherm, LabView, Autodesk Inventor. Customer presentations. 118K. 03302015.4

Algorithm and Software Development Engineer/Scientist

Ph.D-ME. A computational algorithm, thermodynamics and software “guru” for a variety of optical and imaging technologies (high end photography lenses, night vision). Works with highly precisioned surfaces, performs applications of probabilistic and statistical analysis for quality control. Systems FEA for impedance matching, interferometry, metrology. Automotive and DoD/military industries. Uses C/C#, Unix, MATLAB, MathCAD, MAGNET, Ansys, etc. Multiple technical pubs, patents. Contract or direct hire. 120K. 03112015.5

Mechanical Systems Test Lab Engineer – Satellites, Solar

BSME. A consummate satellite and solar systems test engineer in laboratory environment, working with solar mounting, PV and hydraulic systems, transducers.

  • Vast array of product tests: Environmental conditioning, bonding path resistance, mechanical loading, destructive testing (stress/strain, corrosion, friction, wear, rigidity, fire -UL).
  • Generates test setups, reports, including for new product concepts and maintains/calibrates equipment, and programs heat/humidity chambers.
  • Special skill: Coordinated and won Sat Level 4 Test Facility UL 2703 certification, and generated literally all technical documentation necessary. Developed test documentation control system.

Uses AutoCAD, DraftSight, SolidWorks, COSMOS, MATLAB, LabVIEW, Scilab. 5 Years. 70K. 03172015.8

Director, Engineering/Mechanical High Temp Equip

Ph.D-ME. Leads design teams at technologist level for automation equipment, turbines, power generation/conversion, renewable energy/hydro-power (marine) and power modulation equipment. Performs computational mechanics, risk assessment, validation, budgeting, scheduling, plus drives product roadmaps, generates system-level specifications, and designs to stringent standards for harsh environments (thermals, vibration etc). Structural analysis involves rotor dynamics, bearing system analysis, hydraulics.  ANSYS, CFX, SolidWorks, Pro-E, Abaqus, C, MATLAB, Simulink, Maple, MathCAD. Multi patents/award/honors. >15 Years. 175K. 03172015.01

Materials Engineering Scientist – Nanotubes / Films

Ph.D/Mtls. Performs next-generation applied research and high level experiments for variety of semiconductor chemical and structural properties and processes: Electro/electroless plating, synthesis, and electro/stress migration. Involves carbon/nanotube and nanocomposites for packaging, nano-crystalline copper and PDMS thin films, nano-wiring, interconnectors for silicon wafers, and MEMS transducers. Performs characterizations and performance improvement studies (strength, thermal/electrical conductivity). Contract or Direct hire. Publications, patents. >10 Years. 03132015.2

Sr Mechanical Engineer – Motors

MSME. Electromechanical design product lead for electric motors and magnetic bearings for automotive industry. Oversees all design efforts, develops drawing packages

  • Performs tolerance stack-up, FEA/motor efficiency/root cause and other product reliability analysis/calculations, validation, and thermal optimization
  • Managed overseas supply chain and all resources to ensure timely deliverables
  • Generates competitive advantage via intellectual property
  • Significant customer technical interaction

Uses C, Pro-E Series/Wildfire, Ideas, AutoCAD, SolidWorks, Gambit, IcePak, ANSYS. Six Sigma Black Belt. Patents. 125K. 03122015.2

Contract Thermal Mechanical Engineer

MSME. Provides thermal design, analysis, modeling and test for electronics, signal processing assemblies, cooling systems, including infrared and optical devices, satellite and avionics subsystems, space vehicles and payloads. Implements cryogenics and develops/models high power, high density electronic packaging. Manages test lab (shock, vibration, temp cycles) and develops SBIRs. Uses Sinda (Fluent, Trasys), I-DEAS/TMG, TSS, Thermal Desktop, Thermica, MathCAD, Patran. Contract only. U.S. Citizen. Previous SSBI security clearance. $80K. 02262015.01

Failure Analysis Engineer – Board Level, Semiconductor

Ph.D.-Chem/>10 Years. Has concentrated experience with highly complex failure analysis for quality and reliability. Performs root cause, metrology and statistical data analysis, equipment qualification, material property studies and development for improved shock and thermal cycling performance, studies methods for soldering joint cracks during thermal cycling, and resolves temperature cycling reliability issues. Design new board electronic package components. Has reduced test board requirements by one third. Has a strong background in developing semiconductor processes involving photolithography, multi-layer, metallography, ultraviolet curable and anti-reflective coatings, polymer/surface characterizations, and substrates/rheology adhesion. Has multiple formal awards and recognition. 110-130K. 02242015.3

Power Transmission Planning Analyst/Engineer – Contract

MSEE/<15 Years. A seasoned contract engineer, performing complex operability, reliability, and usage studies/calculations and recommendations. Applies to: Substation CT saturation, infrastructure analysis for reinforcement, interconnection stability, load pocket, congestion patterns, cable ampacity, ferro-resonance, equipment performance (sizing, grounding, short circuit, load flow, power compensation and transfer), and thermal assessments. Performs large-scale simulations, develops mitigation plans for critical/long term outages, wind farm/solar full grid modeling, and voltage flicker mathematical models. Has studied effects of reactive source substation removals. Assists in FERC 754/715, NERC NUC-001 compliance. Brings marketing talent involving proposal win strategies, external events liaison. Uses MUST, Aspen, SKM, ETAP, GE MAPS and more. Contract or direct hire. 100K. 02172015.3

Chief Engineer – Power Electronics / Controllers

BSEE/>20 Years. An executive level engineering and product development leader for power electronics to include, in part: Energy storage, converters (100kW and up), inverters, amplifiers, analog circuitry, embedded firmware, FPGA, DSP, thermal systems, variable frequency/servo drives, and servomotors – applying to aerospace, military/defense, automotive and industrial.

Prior to current role, has held roles as general manager, engineering manager, and has founded small startups.

Identifies, develops and defines product specifications based on market and other global studies. Excels in startup environment to “hatch” engineering groups, and setup processes, control systems and functions (DFMEA, modeling, simulation, 3D PCB and layout). Creates strategic partnerships and joint ventures. Builds large, remote technical teams.

This is the type of candidate that companies build development groups around.

Uses Verilog, C, Embedded Coder, MATLAB, Simulink, PSIM, Altera, Lattice and more. Multiple publications and patents.

Contact us for more details!  02032015.6

UPS / Power Systems Sales and Marketing Manager

BSEE/>20 Years. Sells and markets UPS systems, batteries, chargers, generators, cooling / monitoring systems, surge protection equipment, fuel cells and lighting for solar, wind, utilities / grid, photovoltaic, avionics and commercial applications. Solutions are often turn-key and multi-year contracts. Develops, pursues and trains all sales channels. Seeks out product solution partnerships and has substantial marketing talents. FAA interaction. Brings background in DC power for telecommunications / wireless telephony. 65-75K. 01302015.6

Thermal/Power Generation Sales Manager

MBA/>20 Years. Generates multi million $ revenue for UPS systems, steam / gas turbines, and power generation systems and services, including condensers, water heaters, heat exchangers, and waste heat boilers for oil/gas refining, petrochemical and solar industries to utility scale. Performs direct domestic and international sales, plus sales force and outside channel management, ensures customer deliverables satisfaction and is ultimately responsible for business development. Conducts technical presentations and has substantial customer liaison role experience. Also has a comprehensive background in gas turbine power generation and UPS systems for various types of end users. Has expertise in power architecture design, project management, long term service agreements and new product market development. 130-140K. 01262015.2

Senior RF/Microwave Engineer and Project Manager

20 Years. Has strong hardware and circuit design, construction and product management experience. Hardware involved: Microwave / millimeter wave devices with planer / waveguide topologies from 70MHz to 107 GHz; high efficiency/low noise switch mode power supplies; high power/density RF and multilayer PCB design/layout with high signal integrity and max thermal performance. Works with strong RFI, EMI and ESD suppression and stringent high reliability compliance. Provides simulation, thermal analysis, various complex product analyses, and assembly process enhancements. Applies primarily to space, military and some commercial. Has developed key industry linearized channel amplifiers. Strong focus for reliability processes. Secret security clearance. Uses HFSS, OrCad, AutoCad, SysCalc, Altium, Eagleware, EM simulator and more. Available for contract or direct hire. 100-110K. 01232015.5

General Manager / Operations Executive

BSME/>20 Years. A leader, manager and company officer for high technology manufacturers involving a wealth of systems and equipment product development: Medium voltage and high speed subsea motors, generators, power electronics, drive systems, turbo machinery, heat recovery and ORC waste heat to energy systems, flywheel energy systems, and avionics power generation. Industries include aerospace, oceanics, oil/gas and pipelines, and renewable/green energy applications.  Responsible for diverse workforce (engineering, manufacturing, supply chain, operations, quality, finance, marketing, HR).

Thrives in fast paced, early stage start up environments and hatches sister companies for high investment gains. Achieves ambitious big picture goals on schedule/budget. Employs TQM, ISO, lean manufacturing and Six Sigma principles. Has >5 patents: Electric and turbo machinery.

Contact us for more details!

01222015.4

Aerospace Hardware Integration Project Engineer

BSME/>20 Years. Leads a team of skilled technicians for spacecraft payloads / aircraft hardware integration. Brings extensive design and manufacturing background to implement process improvements with an eye for improved cycle times and quality concerns. Develops high level operational test procedures. Leads electro-mechanical cost reduction projects, effects qualification and design changes with various groups (customers, engineering, manufacturing, test facilities, suppliers), performs project cost / scheduling / performance / risk analysis, and authors proposals for customer requirements. Has renewable energy background and applies Lean principles, Six Sigma. Available for direct hire or consulting. 110-120K. 01212015.1

Power Electronics Engineering / Operations Manager

BSEE-Honors/15 Years. Dual product line engineering and operations manager for semiconductor test equipment, high current power supplies, switches, drive/motion components, analog, digital, microprocessors, instrumentation, sensors, thermal and automation/process engineering solutions, and various software. Manages engineering groups and operations, including overseas; builds teams, creates various system architectures (PLM), implements TQM and process improvements, leads product introductions, and facilitates costs/budgets/profit and loss benefits. Has a mechanical design background. A direct or consultant candidate. 130K. 01202015.4

Process and Lab Equipment Engineer – Semiconductor

Ph.D.-Chem/>15 years. An innovative process engineer and equipment developer for solar and semiconductor industry. Invents and builds systems for thermal processing, develops process and material handling equipment and procedures, operates wafering plants for solar silicon substrates and completes special projects for solar factories. An expert with thin-film metrology, process optimization and rapid prototyping. Performs high level inline experiments. Direct or consultant candidate. Uses all manner of lab tools and also SolidWorks, JMP, DFM, DOE and more. 100K. 01202015.3

Space Program Lead RF Engineer – Orbital Sciences / Power and Ground Systems

MBA (pending), MS-Sys Engineering/>20 Years. Dual industry expert for systems engineering and project consultancy for satellite and space industries, with substantial customer interaction, relating to:

1) Satellite electrical power management systems: Functions as project manager and test conductor, routinely performing scientist-level analysis, component integration supervision, deliverables tracking; plus in-orbit, thermal vacuum chamber and 5KW telecommunications payload testing.

2) Spacecraft systems integration: Mission operations and control room systems, flight / ground systems and communications, terrestrial networks, RF-to-spacecraft linkage and on-board data handling functionality. Led team to perform ground computer data flow and spacecraft command/telemetry analysis.

Previous security clearance. Formal awards recipient. 120-140K. 01192015.9

Senior Hardware / Software Development Engineer – Instrumentation / PCB / RF

BSEE/>20 Years. A well-rounded, experienced hardware and software engineering lead for design/test, involving: Radiation detectors, RF, amplifiers, controls, electronics cards, instrumentation, sensors, magnetics, thermals, audio products, mixed signal, converters, opticals, PCB/semiconductors, analog, DSP, embedded firmware, repeaters, fiber-optics, and test fixtures/equipment. Performs specialized and innovative design projects, temperature mapping, PCB layouts, overseas layout supervision. Has developed new prototype labs for business expansion purposes. Industries: Consumer electronics, aerospace, avionics; and applications vary from fuel gauging to voltage regulating. Meets EMC directives. Also has quality and telecommunications background. Uses Protel, Viewlogic, ORCAD, VHDL code, SwitcherCAD and more. 70-80K. 01152015.6

 

Product Development and Program Manager

BSEE/>20 Years. A product driven, highly technical engineering group management professional with focus on projects resulting in business development /innovation. Drives system architecture, embedded firmware design, manufacturing, various department process improvements/streamlining, controls budgets, tracks costs/resources, employs stage-gate process, validates product performance, conducts global customer training and brings a vast array of high level regulatory standards experience plus RoHS. Industries: IT/Networking, medical, aerospace, space program, military/defense. Products / technologies: Controllers, wireless, transceiver, devices, imaging software, LED, motors, various power supplies, analog circuitry, and thermals. Fluent: Agile, ARM, RS232/RS485, SolidWorks, Python. Six Sigma, Scrum Master. 150K. 01152015.3

Design and Test Engineer – Power Supplies / Motors / Semiconductor

MSEE/>20 Years. Has good mix of product design and test experience involving digital / analog circuitry, power management ICs, power supplies, various topologies, transformers, converters, switch mode, motor drives, rectifiers, regulators, propulsion systems, and real time operating systems (RTOS). Performs simulations, characterizations, troubleshooting, complex and various analysis, generates BOMs, specifications, schematics capture and provides customer support. Has a very strong alternate role to develop test benches and custom test equipment, providing EMI test/analysis and reporting. Industries: Avionics, satellites, space program. Fluent: Zuken, MathCad, LabView, PSpice and more. Has formal recognition. 125-135K. 01142015.7

Project, Systems and Engineering Director / Petrochemicals, Avionics

Ph.D.-EE, ME/20 Years. Very high level engineering and large project leader for petrochemicals and avionics industries. Works with 1. Oil/gas technology (wireline, sub-sea/shipboard, down-hole, land applications to include cooling systems, fluid dynamics, rotors, magnetics, actuators, compressors, controllers), 2. Electric vehicle systems, wind power (turbine generators, converters, backup power), 3. Avionics (motor controllers, generators, thermals). Also has nuclear, wind energy background. Performs physics-based complex analysis, total cost management, technical proposal process and negotiations, program management, performance verification, on-site support, high level testing, root cause analysis, manufacturing process simplification. Strong for intellectual property, business acquisitions. Highly awarded and published. An array of patents. 01142015.4

Mechanical Designer – Aerospace / Avionics Structures

ASME/10 Years. Has experience with avionics primary and secondary structural modifications design, adapters, antenna adapters, and various parts and assemblies for mobile and airborne platforms. Provides electronic packaging, works with heat / vibration issues, prepares drawings / routings / technical documentation, and coordinates various players within project scope. Fluent: Catia. 70K. 01122015.6

Control Systems and Integration Engineer

MSEE-CS/>15 Years. A vast amount of very innovative systems design, integration and upgrade experience working with various hardware and software, embedded technology, PLC, thermals, automation, RFID, real time operating systems, robotics, HMI/SCADA, motion controls, green energy/generators and more. Varied industries such as industrial, power electronics, medical, entertainment/TV, consumer products and food – along with various stringent regulatory codes (FDA, etc). Provides object/component oriented programming, reverse engineering, modeling, simulation, algorithms, testing, technical documentation, extensive technical support, networking, and drives concepts to fruition. Uses AutoCAD, SQL, XML, OPS, Modbus, Labview, Matlab and more. An excellent contract candidate. 110-130K. 01122015.2

Senior Mechanical Engineer – Automotive / Defense

BSME-Honors/10 Years. A hands on mechanical engineering leader working with equipment and systems for electric and other vehicles, wind power, avionics and weaponry.  Involves prototypes, microcontrollers, motors, generators, thermals, enclosures, turbines, frames, batteries and more.  Provides 3D print, design, fabrication, machining, sheet metal, test and integration, board layouts, packaging, components selection and more – often as team lead. Uses SolidWorks, Pro/E series and Pro/Mechanica, ANSYS, Matlab, Labview and more. Six Sigma. 100-120K. 01092015.9